Water leak detection
UV Fluorescent Colored Tracers
UV Fluorescent Clear Tracers
Food Tracers for Water
Non-fluorescent color tracers
Fluorescein: fluorescent tracer for leak detection
Equipment for Tracing and Diagnostics
UV Lamp Kits
Dosing accessories and equipment
Complete Air Conditioning Tracing Kits
Complete Oil and Fuel Tracing Kits
Complete Water Tracing Kits
Smoke generators for pipes, sewer networks and airtightness testing
Inflatable pipe plugs for sewer pipes, leak testing and network interventions
Detection needles
Tracing in Natural Environments
Fluorimeters and Data Loggers
Fluorescent Tracers for Maritime Safety
Powder Tracers
Concentrated Liquid Tracers
Sodium Fluorescein / Uranine
Rhodamine WT 20%
Eosin
Sulforhodamine B
Potassium iodide
Amino G Acid: fluorescent tracer for studies in natural environments
Tracing in Industrial Environments
Oil and Fuel Tracers
Colorants and Markers
Fluorescent UV Markers
Powder Contrast for Industrial Filtration
Tracers for Air Conditioning and Refrigeration Systems
Water & sanitation: tracing solutions for networks and technical installations
Contamination Simulation
Tracers for Dry Contamination Simulations
Tracers for Wet Contamination Simulations
Contamination Simulation Kit
Inflatable pipe plugs are used to temporarily isolate a section of pipe, block a flow or prepare a leak test under safe conditions. Used by sewer, plumbing, maintenance and network diagnostic professionals, they make interventions easier on pipes, manholes, wastewater networks, stormwater systems or technical lines. At Fluotechnik, we offer a selection of inflatable pipe plugs designed to meet field requirements: fast plugging, simple installation, suitable diameters and safe use during inspection, repair or testing operations.
Temporarily block a pipe to secure an intervention, limit a flow or prepare an inspection.
Inflatable pipe plugs make it possible to close off a network section in order to carry out tests, checks or targeted diagnostics.
A relevant solution for pipes, manholes, drains, stormwater networks, wastewater systems and technical lines.
The plug is inserted into the pipe and then inflated to seal the section concerned.
Fluotechnik helps you choose the right model according to pipe diameter, network type and intended use.
To meet temporary plugging, leak testing, maintenance and network diagnostic needs, Fluotechnik offers several models of inflatable pipe plugs suited to field interventions. Depending on the pipe diameter, network type, expected pressure or operation to be carried out, you can choose a solution adapted to your application. Each reference has been selected to facilitate installation, provide reliable plugging and meet the constraints of professionals working on water networks, wastewater systems, stormwater networks or technical pipes. This range allows you to compare the different inflatable pipe plugs according to their diameter range, use, format and compatibility with intervention conditions.
An inflatable pipe plug is a piece of equipment used to temporarily close a pipe or a section of network. It can be used to block a flow, isolate an area for inspection, carry out a leak test or secure an intervention before repair. Its main advantage is that it provides fast and reversible plugging without heavy work on the pipe. This category is intended for professionals working on sewer networks, pipes, manholes, drainage lines, stormwater networks, wastewater systems or technical installations.The plug is inserted into the pipe and then inflated so that it presses against the pipe walls and creates temporary sealing of the relevant section. Choosing the right inflatable pipe plug is essential to ensure safe intervention and reliable inspection. The right model depends in particular on the pipe diameter, the type of fluid, the use context and the purpose of the operation: leak testing, maintenance, repair, diagnosis or temporary isolation.
An inflatable pipe plug is used as temporary isolation equipment. It blocks a pipe section so that an inspection, test, repair or maintenance operation can be carried out. Its use must be adapted to the pipe diameter, the condition of the network and the safety requirements of the intervention.
Before the intervention, it is necessary to check the internal diameter of the pipe and select an inflatable plug compatible with the relevant size range. A suitable model ensures better hold, better sealing and a more reliable intervention.
The plug is inserted into the pipe, manhole or network section to be isolated. Its position must allow the area to be closed effectively while leaving the necessary access for inspection, testing or maintenance operations.
Once in place, the plug is gradually inflated using the appropriate device. It then presses against the pipe walls to temporarily block the passage of fluid. Inflation must be carried out according to the product recommendations and network conditions.
Once the pipe has been isolated, the professional can carry out the leak test, diagnostic work, repair or maintenance operation. When the intervention is complete, the plug is deflated and then removed from the pipe.
Choosing the right inflatable pipe plug means improving safety, efficiency and precision during pipe interventions. Fluotechnik selects equipment designed for professionals who need to isolate a network section, prepare a leak test or secure a maintenance operation. Our range covers several field contexts, with solutions that are easy to implement and suited to network constraints.
The plugs make it possible to close a pipe section in order to inspect, test or intervene with greater control.
A useful solution for pipes, manholes, drains, stormwater networks, wastewater systems and technical installations.
Plugging a network section makes it possible to prepare tests and inspect the integrity of a pipe more accurately.
The plug is positioned in the pipe, inflated, and then removed after the intervention, without permanently modifying the network.
The range can be adapted to different pipe sections according to professional needs.
Our team helps you choose the right inflatable pipe plug according to diameter, network type and intervention objective.
See how inflatable pipe plugs are used to isolate a pipe, prepare a leak test or secure an intervention on a network. These demonstrations help explain plug installation, inflation, its role in sealing and its value for sewer, maintenance and diagnostic professionals.
An inflatable pipe plug is an inflatable piece of equipment used to temporarily close a pipe or network section. It can block a flow, isolate an area or prepare a testing, maintenance or repair operation.
It is used to isolate a pipe section, secure an intervention, carry out a leak test, temporarily block a flow or inspect a precise area of a network.
Inflatable pipe plugs can be used in pipes, manholes, wastewater networks, stormwater systems, drainage lines, sewer networks or certain technical installations.
The choice depends on the internal diameter of the pipe to be sealed. A plug compatible with the relevant diameter range must be selected to ensure effective and safe plugging.
Yes. This is one of its main uses. The plug makes it possible to isolate a network section in order to carry out a leak test, inspection or targeted check.
Depending on the model, the conditions of use and the condition of the product after the intervention, some inflatable pipe plugs can be reused. The manufacturer’s recommendations and the integrity of the equipment should be checked before each use.
Yes, inflation must be carried out with a device suited to the model being used. It is important to follow the inflation instructions and indicated limits to ensure intervention safety.
An inflatable pipe plug is mechanical equipment used to isolate a pipe. A tracer is used to visualise a flow or locate a leak. The two can be complementary during a diagnosis or a leak test.
Inflatable pipe plugs in video: see pipe isolation in real conditions
An inflatable pipe plug meets an essential network requirement: temporarily isolating a pipe in order to inspect, test, repair or secure an intervention area. In sewer, maintenance and diagnostic work, this plugging capability is often essential for working cleanly, limiting flows and focusing on a precise network section.
Choosing the right model mainly depends on:
By bringing together the main solutions related to inflatable pipe plugs on a single page, Fluotechnik helps you compare uses, better understand the value of this equipment and select the reference best suited to your needs. To go further, you can also explore our tracing solutions, water kits and diagnostic accessories to build a complete and coherent intervention method.
Depending on the type of network, the objective of the intervention and the level of equipment required, an inflatable pipe plug can be used on its own or in combination with other Fluotechnik solutions. To prepare a test, visualise a flow or structure a complete intervention, plugging can be combined with suitable tracers, kits or accessories.