Tracing kits for chillers and air conditioning

Q: When should you choose a complete kit?

A kit is particularly useful for:Equipping a technician or teamStarting to use fluorescent tracer detectionReplacing several accessoriesCarrying out diagnostics regularlyHaving organised, portable equipment

Q: How do you choose the right kit?

The choice depends on:The type of installationThe refrigerants and lubricants involvedYour existing equipmentYhe number of planned operationsThe required application methodThe preferred lamp power and formatFluotechnik can help you compare the available configurations.

Leaks in refrigeration circuits can be difficult to locate, particularly when they are slow, intermittent or situated in an area that is difficult to access. Fluotechnik tracing kits bring together the products and accessories needed to prepare the inspection, introduce the tracer and examine suspected areas more accurately. Designed for refrigeration technicians, air-conditioning specialists and HVAC maintenance professionals, they can be used on chillers, air-conditioning systems, refrigeration installations and technical cooling equipment. Depending on their contents, the kits may combine a tracer, application equipment, dosing accessories and detection tools, providing a consistent solution that is ready for use in the field.

A solution ready for field use

Find the products and equipment required to apply the tracer and inspect the circuit in a single kit.

Designed for refrigeration professionals

Work on chillers, air-conditioning systems, refrigeration circuits and HVAC installations.

More targeted leak detection

The tracer helps locate areas of seepage or fluid loss that may otherwise be difficult to identify.

Different equipment levels available

Choose a kit suited to occasional inspections, regular maintenance or the complete equipment of a technician.

Expert technical support

Fluotechnik helps you select a solution compatible with your installation, protocol and frequency of use.

A solution ready for field use

Find the products and equipment required to apply the tracer and inspect the circuit in a single kit.

Designed for refrigeration professionals

Work on chillers, air-conditioning systems, refrigeration circuits and HVAC installations.

More targeted leak detection

The tracer helps locate areas of seepage or fluid loss that may otherwise be difficult to identify.

Different equipment levels available

Choose a kit suited to occasional inspections, regular maintenance or the complete equipment of a technician.

Expert technical support

Fluotechnik helps you select a solution compatible with your installation, protocol and frequency of use.

Our tracing kits for refrigeration and air-conditioning circuits

Fluotechnik offers several kit configurations for diagnosing chillers, air-conditioning systems, HVAC equipment and other refrigeration installations. Bringing these components together makes it possible to prepare the operation with the appropriate equipment without having to select each item separately. The choice of kit depends on the type of installation, the refrigerants and lubricants involved, the number of inspections carried out and the equipment already available.

Depending on the product, kits may include:

One or more suitable tracers
Injection or application accessories
Dosing equipment
A UV lamp or other detection equipment
Glasses designed to improve signal contrast
Storage or transport accessories

What is a leak detection kit for air conditioning and chillers used for?

A tracing kit helps locate the source of a leak more accurately within a refrigeration installation. A compatible tracer is introduced into the circuit according to the appropriate procedure and then circulates with the fluid or lubricant. If a leak is present, the tracer may appear around the affected area and can be identified using suitable detection equipment.

This method can make it easier to inspect:

Fittings and connections
Hoses and pipes
Valves
Heat exchangers
Compressors
Areas that have previously been repaired
Components that are difficult to inspect directly

The value of a kit lies in the complementary nature of its components. The technician has access not only to the tracer but also to the accessories required to apply it, measure the correct quantity and reveal its signal. For professionals who already have a lamp and the necessary application equipment, purchasing a UV tracer alone may be sufficient. A kit is more appropriate when a complete set is needed or when several pieces of equipment must be replaced at the same time.

How do you use a tracing kit on a refrigeration circuit?

The method depends on the contents of the kit, the installation being inspected and the instructions provided for the tracer. Before beginning any operation, it is essential to check that the products are compatible with the refrigerant, lubricant and circuit components.

Step 1 - Identify the installation and circuit concerned

Begin by determining the type of equipment:

Chiller
Air-conditioning system
HVAC installation
Refrigeration circuit
Cold room
Technical cooling equipment

The characteristics of the installation help determine the appropriate tracer, application method and accessories.

Step 2 - Define the purpose of the inspection

The kit can be used in several situations:

Locating a leak that is difficult to identify;
Inspecting a suspected area;
Checking the installation after a repair;
Carrying out diagnostics during maintenance;
Monitoring an installation showing gradual fluid loss.

The purpose of the inspection determines the examination method and when the circuit should be checked.

Step 3 - Check the tracer’s compatibility

Before application, ensure that the tracer is suitable for the circuit, refrigerant, lubricant and operating procedure. The quantity used and the method of introduction must comply with the product recommendations. Correct dosing produces a usable signal without introducing an unnecessary amount into the installation.

Step 4 - Introduce the tracer into the circuit

The product is applied using the accessories supplied in the kit or compatible equipment. This operation must be carried out by a qualified professional in accordance with the procedures applicable to the installation. The system is then operated under the conditions required for the tracer to circulate towards any potential leak.

Step 5 - Inspect areas likely to leak

When the kit uses a fluorescent tracer, the inspection is carried out with a suitable UV lamp. Fittings, valves, pipes, heat exchangers and other sensitive points are examined systematically. Contrast glasses or filters can improve signal visibility and make faint traces easier to identify.

Step 6 - Confirm the leak and prepare the repair

A signal appearing in a specific area helps target the intervention. The technician can then confirm the diagnosis, clean the area where necessary and prepare the repair or replacement of the affected component. A further inspection can be carried out after the work to check the result.

Why choose a Fluotechnik kit for refrigeration and air-conditioning diagnostics?

Effective leak detection depends both on selecting the right tracer and on using suitable equipment to apply and observe it. Fluotechnik kits are designed to bring together complementary components and make work on refrigeration installations easier to organise.

A consistent diagnostic setup

The different components are brought together to prepare the application, introduce the tracer and inspect suspected areas.

Time saved in the field

Technicians have the accessories they need from the beginning of the operation, reducing forgotten equipment and time spent searching for tools.

Solutions for several types of installation

The kits can meet the requirements of chillers, air-conditioning systems, HVAC installations and other compatible refrigeration circuits.

Accurate detection under UV light

When a leak is marked by a fluorescent tracer, the lamp and detection accessories make the signal easier to locate.

Different kit configurations available

Select a kit according to your existing equipment, the frequency of your inspections and the accessories you genuinely need.

Expert technical support

Our team helps you identify the kit suited to your installations, application method and working conditions.

FAQ about kits for chillers and air conditioning

What is a tracing kit for a chiller or air-conditioning system?

It is a set of products and equipment designed to make leak detection easier within a refrigeration circuit. Depending on its contents, the kit may include a tracer, application accessories, dosing equipment, a UV lamp, contrast glasses or other useful diagnostic tools.

What is the difference between a kit and a UV tracer alone?

The UV tracer is the fluorescent product introduced into the circuit. The kit combines this product with some or all of the equipment required to apply it and observe its signal. A tracer alone may suit a technician who already has the necessary equipment. A kit is more suitable when a complete solution is required.

When should you choose a complete kit?

A kit is particularly useful for:

Equipping a technician or team
Starting to use fluorescent tracer detection
Replacing several accessories
Carrying out diagnostics regularly
Having organised, portable equipment

Which types of equipment can these kits be used on?

Depending on the products they contain, the kits may be used on chillers, air-conditioning systems, HVAC installations, cold rooms, refrigeration circuits and other technical cooling equipment. Compatibility with the installation, refrigerant and lubricant must always be checked.

Can a kit detect every type of leak?

A fluorescent tracer can help locate many leaks, but the result depends on factors such as their position, size, circulation time and the accessibility of the affected area. The method may need to be combined with other diagnostic techniques when conditions require it.

Is a UV lamp always required?

A UV lamp is required when detection relies on a fluorescent tracer that is invisible or difficult to see under ordinary lighting. Some kits include a lamp and contrast accessories.

How long should you wait before inspecting the circuit?

The required time depends on the installation, circulation rate, location of the leak and procedure used. Some leaks can be identified quickly, while others require the tracer to circulate for longer.

Can any tracer be used in a refrigeration circuit?

No. The tracer must be compatible with the refrigerant, lubricant, circuit materials and the equipment manufacturer’s recommendations.

How do you choose the right kit?

The choice depends on:

The type of installation
The refrigerants and lubricants involved
Your existing equipment
Yhe number of planned operations
The required application method
The preferred lamp power and format

Fluotechnik can help you compare the available configurations.

Choosing a kit suited to your refrigeration operations

For refrigeration and HVAC technicians, having the right equipment makes it possible to prepare leak detection operations more quickly and inspect installations under better conditions.

The choice of kit mainly depends on:

The type of equipment: chiller, air-conditioning system, cold room, refrigeration circuit or HVAC installation
The refrigerants and lubricants present in the circuit; the compatible tracer type
The required application method
The equipment already available
The frequency of inspections
Inspection and accessibility conditions
The required detection sensitivity

A professional who already has a UV lamp and injection accessories may prefer to purchase the tracer alone. A complete kit, by contrast, makes it easier to implement a consistent method by combining the product, application equipment and detection tools. Some configurations are suitable for occasional use, while others better meet the requirements of technicians carrying out regular maintenance and leak detection operations. Fluotechnik supports you in selecting a solution compatible with your installations and field operations.

Complete your equipment for refrigeration system diagnostics

Complete kit, UV tracer, lamp or solution intended for another type of circuit: discover the Fluotechnik ranges that allow you to adapt your equipment to the installations and fluids you work with.