liquid-leak-detection-and-tracing-dye-purple-detect-purple-1
liquid-leak-detection-and-tracing-dye-purple-detect-purple-2
liquid-leak-detection-and-tracing-dye-purple-detect-purple-3
Précédent
Suivant
liquid-leak-detection-and-tracing-dye-purple-detect-purple-1
liquid-leak-detection-and-tracing-dye-purple-detect-purple-2
liquid-leak-detection-and-tracing-dye-purple-detect-purple-3

Liquid leak detection and tracing dye PURPLE - DETECT+ PURPLE

Réf. DP.1L
(4)
32,70€
HT
39,24€
TTC

Detect leaks and test waterproofing with DETECT+ PURPLE, a purple fluorescent UV tracer visible under 365 nm lamp. Dosage 1 to 5 ml/L, ideal for construction and industry. Made in France.

Net unit weight
Add to cart

DETECT+ PURPLE: Purple Fluorescent UV Tracer for Leak Detection

An invisible water leak can cause costly damage and resource loss, whether in a residential building, industrial facility, or complex hydraulic network. How can you quickly and accurately locate the source of the problem without risking environmental harm or user safety? DETECT+ PURPLE, a purple fluorescent UV tracer in liquid solution, is designed to address these challenges. Visible under a 365 nm UV lamp, it detects leaks, infiltrations, and waterproofing defects in water networks, pipes, tanks, and civil engineering structures. Ready-to-use, environmentally friendly, and easy to handle, this product is aimed at construction professionals, industry experts, and demanding individuals. Discover how this French-made tracer simplifies your diagnostics and optimizes your interventions.

DETECT+ PURPLE is a precise, safe, and versatile diagnostic tool designed to meet the needs of construction and industry professionals. Made in France and compliant with the strictest standards, it is the reference for UV tracing and leak detection.

DOWNLOAD THE CATALOG
TECHNICAL DATA SHEET
TECHNICAL GUIDE
APPLICATIONS AND TIPS

Building Applications

Roofs and Terraces

DETECT+ PURPLE is ideal for waterproofing tests on roofs, terraces, balconies, and floor coverings. It confirms the absence of infiltration after installation or repair and visually identifies defects thanks to its intense UV fluorescence.

Façades and Buried Walls

It helps locate water infiltrations on floors, walls, and ceilings, revealing damp areas or joint defects, even in complex structures.

Bathrooms and Pools

This tracer checks the waterproofing of shower trays, bathtubs, drains, and tiling, and locates leaks in pools and plumbing networks.

Pipes and Networks

For buried pipes and networks, DETECT+ PURPLE traces the path of pipes and accurately identifies leak points, even in hard-to-reach areas.

ADD TO CART

Industrial Applications

Cooling Circuits

DETECT+ PURPLE quickly identifies leaks in heat exchangers, closed circuits, or sensitive areas, and simulates leaks for preventive maintenance.

Tanks and Vats

It is highly useful for waterproofing tests on tanks and vats, highlighting defects in welds, fittings, or foundations.

Industrial Processes and Maintenance

In industrial processes, DETECT+ PURPLE traces fluids in closed circuits and identifies losses or contamination in internal networks, reducing downtime.

R&D and Simulation

In research and development, it studies flows, validates hydraulic models, and simulates controlled releases to assess environmental impact.

Technical Features

Type: Purple fluorescent UV liquid, visible under 365 nm lamp.

Dosage: 1 to 5 ml per liter of water.

Packaging: Ready-to-use liquid solution, available in cans.

Visibility: Bright purple fluorescence under UV.

Compatibility: Construction, industry, hydraulic networks, sensitive environments.

Cleaning: Rinse thoroughly with water after use; use BRILLANT REMOVER to eliminate residual traces. Avoid use on absorbent surfaces like façades, natural stone, or joints.

Safety: Non-polluting, non-toxic, environmentally friendly.

Usage tips and precise dosage

  • Preparation : Dilute 1 to 5 ml of DETECT+ PURPLE per liter of water.
  • Application : Mix until homogeneous and inject into the circuit or area to be tested.
  • Visualization : Observe under a 365 nm UV lamp to detect leaks.
  • Localization : Identify leak points thanks to the bright purple/orange fluorescence.
  • Cleaning : Rinse thoroughly with water after use; use BRILLANT REMOVER to eliminate residual traces. Avoid use on absorbent surfaces like façades, natural stone, or joints.

Precautions

  • Wear gloves and goggles during handling.
  • Avoid contact with eyes or mucous membranes.
  • Respect the dosage to ensure effectiveness and avoid over-concentration.

Safety and French Manufacturing

  • Safety : Non-polluting product, handle with standard PPE.
  • Manufacturing : Developed and packaged in France by Fluotechnik.

Who Uses It?

The spectrum of users is broad, reflecting the product’s versatility:

Plumbers & heating engineers

Leak diagnostics on sanitary installations and internal networks.

Roofers & waterproofing specialists

Detection of weak points on membranes and flat roofs.

Leak detection experts

Precision tools for interventions in private homes, public facilities, and businesses.

Building inspectors & damage assessors

Inspections during renovations or damage assessments.

Hydrology engineers & research offices

Monitoring of dispersion or infiltration.

Industrial maintenance technicians

Tests on cooling circuits, tanks, and process equipment.

Municipal technical services

Management of stormwater networks, retention basins, or underground infrastructures.

User Benefits

Precision

Immediate visual detection under UV, even at low concentrations.

Safety

Safe for installations and users.

Versatility

Suitable for construction, industry, and technical studies.

Eco-Friendly

Environmentally respectful formulation.

Ease of Use

Ready-to-use liquid, simple and reproducible dosing.

Visual Proof

Supports technical findings for clients, insurers, or inspection bodies.

French quality

Guarantee of reliability and traceability

FAQ – DETECT+ PURPLE : Purple Fluorescent UV Tracer for Leak Detection

The recommended dosage is 1 to 5 ml of tracer per liter of water for optimal fluorescence.

On absorbent surfaces, rinse quickly after testing to avoid residual stains. For these surfaces, the colorless UV MAX range is preferable.

Yes, it is widely used for leak diagnostics in cooling circuits, tanks, industrial reservoirs, or pipelines.

Rinse thoroughly with water after use; use BRILLANT REMOVER to eliminate residual traces. Avoid use on absorbent surfaces like façades, natural stone, or joints.

The fluorescence remains visible until the product is rinsed, generally up to 48 hours depending on conditions.

Order directly from Fluotechnik or through their network of approved distributors.

This product has not received any reviews yet.